Flashers

Products: 112 of 13
  • 2 Pin Prong Terminal Relay Electronic Flasher 12 Volt LED Turn Signal Light
    (1)  2 Terminal 12V LED Electrical Flasher New 2-prong (2 terminal with ground wire) 12 Volt LED Flasher. Flasher is designed to replace stock turn signal flasher on most 1955 to present cars and trucks with 2 prong 12v systems. Flasher has NEGATIVE ground (flasher will NOT work with early 6v POSITIVE ground cars/truck or motorcycles). Replacement of the stock flasher is usually needed in order for the LED turn signals to operate as intended. Solves: hyper flashing, burnt out bulb indication, or non flashing when using led lights and led light bulbs. We are also including a FREE "reverse polarity" adapter. If your turn signal flasher dock has the wires reversed, no need to disconnect, switch, and reinstall wires. Simply attach the adapter to the end of the flasher. These flashers will also work with stock turn signals, so if you change back to stock lights, there will be no need to swap out the flasher We also offer 3-prong LED flashers for most pre-1955 vehicles that have been converted to 12v Solve Turn Signal Problems: Hyper Flashing, No Flashing, or Burnt Out Bulb Indication when using LED Lights and LED Bulbs 2 Terminal Flasher / 2 Prong with Ground Wire Use with LED lights Max 20 Amps
    • $17.95
  • 2 Pin Prong Terminal Relay Electronic Flasher 12V LED Turn Signal Light Bulb
    (1)  2 Terminal 12V LED Electrical Flasher New 2-prong (2 terminal with ground wire) 12 Volt LED Flasher. Flasher is designed to replace stock turn signal flasher on most 1955 to present cars and trucks with 2 prong 12v systems. Flasher has NEGATIVE ground (flasher will NOT work with early 6v POSITIVE ground cars/truck or motorcycles). Replacement of the stock flasher is usually needed in order for the LED turn signals to operate as intended. Solves: hyper flashing, burnt out bulb indication, or non flashing when using led lights and led light bulbs. We are also including a FREE "reverse polarity" adapter. If your turn signal flasher dock has the wires reversed, no need to disconnect, switch, and reinstall wires. Simply attach the adapter to the end of the flasher. These flashers will also work with stock turn signals, so if you change back to stock lights, there will be no need to swap out the flasher We also offer 3-prong LED flashers for most pre-1955 vehicles that have been converted to 12v Solve Turn Signal Problems: Hyper Flashing, No Flashing, or Burnt Out Bulb Indication when using LED Lights and LED Bulbs 2 Terminal Flasher / 2 Prong with Ground Wire Use with LED lights Max 20 Amps
    • $17.95
  • 2 Pin Prong 12V Terminal Relay Electronic Flasher Switch LED Turn Signal Light
    (1)  2 Terminal 12V LED Electrical Flasher New 2-prong (2 terminal with ground wire) 12 Volt LED Flasher. Flasher is designed to replace stock turn signal flasher on most 1955 to present cars and trucks with 2 prong 12v systems. Flasher has NEGATIVE ground (flasher will NOT work with early 6v POSITIVE ground cars/truck or motorcycles). Replacement of the stock flasher is usually needed in order for the LED turn signals to operate as intended. Solves: hyper flashing, burnt out bulb indication, or non flashing when using led lights and led light bulbs. We are also including a FREE "reverse polarity" adapter. If your turn signal flasher dock has the wires reversed, no need to disconnect, switch, and reinstall wires. Simply attach the adapter to the end of the flasher. These flashers will also work with stock turn signals, so if you change back to stock lights, there will be no need to swap out the flasher We also offer 3-prong LED flashers for most pre-1955 vehicles that have been converted to 12v Solve Turn Signal Problems: Hyper Flashing, No Flashing, or Burnt Out Bulb Indication when using LED Lights and LED Bulbs 2 Terminal Flasher / 2 Prong with Ground Wire Use with LED lights Max 20 Amps
    • $17.95
  • 12V 2 Pin Prong Terminal Electronic Switch Relay LED Turn Signal Light Flasher
    (1)  2 Terminal 12V LED Electrical Flasher New 2-prong (2 terminal with ground wire) 12 Volt LED Flasher. Flasher is designed to replace stock turn signal flasher on most 1955 to present cars and trucks with 2 prong 12v systems. Flasher has NEGATIVE ground (flasher will NOT work with early 6v POSITIVE ground cars/truck or motorcycles). Replacement of the stock flasher is usually needed in order for the LED turn signals to operate as intended. Solves: hyper flashing, burnt out bulb indication, or non flashing when using led lights and led light bulbs. We are also including a FREE "reverse polarity" adapter. If your turn signal flasher dock has the wires reversed, no need to disconnect, switch, and reinstall wires. Simply attach the adapter to the end of the flasher. These flashers will also work with stock turn signals, so if you change back to stock lights, there will be no need to swap out the flasher We also offer 3-prong LED flashers for most pre-1955 vehicles that have been converted to 12v Solve Turn Signal Problems: Hyper Flashing, No Flashing, or Burnt Out Bulb Indication when using LED Lights and LED Bulbs 2 Terminal Flasher / 2 Prong with Ground Wire Use with LED lights Max 20 Amps
    • $17.95
  • 2 Pin Prong 12V Terminal Electronic Flasher LED Turn Signal Light Switch Relay
    (1)  2 Terminal 12V LED Electrical Flasher New 2-prong (2 terminal with ground wire) 12 Volt LED Flasher. Flasher is designed to replace stock turn signal flasher on most 1955 to present cars and trucks with 2 prong 12v systems. Flasher has NEGATIVE ground (flasher will NOT work with early 6v POSITIVE ground cars/truck or motorcycles). Replacement of the stock flasher is usually needed in order for the LED turn signals to operate as intended. Solves: hyper flashing, burnt out bulb indication, or non flashing when using led lights and led light bulbs. We are also including a FREE "reverse polarity" adapter. If your turn signal flasher dock has the wires reversed, no need to disconnect, switch, and reinstall wires. Simply attach the adapter to the end of the flasher. These flashers will also work with stock turn signals, so if you change back to stock lights, there will be no need to swap out the flasher We also offer 3-prong LED flashers for most pre-1955 vehicles that have been converted to 12v Solve Turn Signal Problems: Hyper Flashing, No Flashing, or Burnt Out Bulb Indication when using LED Lights and LED Bulbs 2 Terminal Flasher / 2 Prong with Ground Wire Use with LED lights Max 20 Amps
    • $17.95
  • 2 Pin Prong 12V Terminal Relay Electronic LED Flasher Switch Turn Signal Light
    (1)  2 Terminal 12V LED Electrical Flasher New 2-prong (2 terminal with ground wire) 12 Volt LED Flasher. Flasher is designed to replace stock turn signal flasher on most 1955 to present cars and trucks with 2 prong 12v systems. Flasher has NEGATIVE ground (flasher will NOT work with early 6v POSITIVE ground cars/truck or motorcycles). Replacement of the stock flasher is usually needed in order for the LED turn signals to operate as intended. Solves: hyper flashing, burnt out bulb indication, or non flashing when using led lights and led light bulbs. We are also including a FREE "reverse polarity" adapter. If your turn signal flasher dock has the wires reversed, no need to disconnect, switch, and reinstall wires. Simply attach the adapter to the end of the flasher. These flashers will also work with stock turn signals, so if you change back to stock lights, there will be no need to swap out the flasher We also offer 3-prong LED flashers for most pre-1955 vehicles that have been converted to 12v Solve Turn Signal Problems: Hyper Flashing, No Flashing, or Burnt Out Bulb Indication when using LED Lights and LED Bulbs 2 Terminal Flasher / 2 Prong with Ground Wire Use with LED lights Max 20 Amps
    • $17.95
  • 2 Pin Prong Terminal LED Flasher Electronic Relay Switch Turn Signal Light 12V
    (1)  2 Terminal 12V LED Electrical Flasher New 2-prong (2 terminal with ground wire) 12 Volt LED Flasher. Flasher is designed to replace stock turn signal flasher on most 1955 to present cars and trucks with 2 prong 12v systems. Flasher has NEGATIVE ground (flasher will NOT work with early 6v POSITIVE ground cars/truck or motorcycles). Replacement of the stock flasher is usually needed in order for the LED turn signals to operate as intended. Solves: hyper flashing, burnt out bulb indication, or non flashing when using led lights and led light bulbs. We are also including a FREE "reverse polarity" adapter. If your turn signal flasher dock has the wires reversed, no need to disconnect, switch, and reinstall wires. Simply attach the adapter to the end of the flasher. These flashers will also work with stock turn signals, so if you change back to stock lights, there will be no need to swap out the flasher We also offer 3-prong LED flashers for most pre-1955 vehicles that have been converted to 12v Solve Turn Signal Problems: Hyper Flashing, No Flashing, or Burnt Out Bulb Indication when using LED Lights and LED Bulbs 2 Terminal Flasher / 2 Prong with Ground Wire Use with LED lights Max 20 Amps
    • $17.95
  • 2 Pin Prong Terminal LED Flasher Electronic Relay Switch Turn Signal Light 12V
    (1)  2 Terminal 12V LED Electrical Flasher New 2-prong (2 terminal with ground wire) 12 Volt LED Flasher. Flasher is designed to replace stock turn signal flasher on most 1955 to present cars and trucks with 2 prong 12v systems. Flasher has NEGATIVE ground (flasher will NOT work with early 6v POSITIVE ground cars/truck or motorcycles). Replacement of the stock flasher is usually needed in order for the LED turn signals to operate as intended. Solves: hyper flashing, burnt out bulb indication, or non flashing when using led lights and led light bulbs. We are also including a FREE "reverse polarity" adapter. If your turn signal flasher dock has the wires reversed, no need to disconnect, switch, and reinstall wires. Simply attach the adapter to the end of the flasher. These flashers will also work with stock turn signals, so if you change back to stock lights, there will be no need to swap out the flasher We also offer 3-prong LED flashers for most pre-1955 vehicles that have been converted to 12v Solve Turn Signal Problems: Hyper Flashing, No Flashing, or Burnt Out Bulb Indication when using LED Lights and LED Bulbs 2 Terminal Flasher / 2 Prong with Ground Wire Use with LED lights Max 20 Amps
    • $17.95
  • 12v LED Electronic Flasher
    12v LED Electronic Flasher QA-W7ZP-XD1V
    • $11.95
  • 2 Pin Prong Terminal Relay Electronic Flasher 12 Volt LED Turn Signal Light
    (1)  2 Terminal 12V LED Electrical Flasher New 2-prong (2 terminal with ground wire) 12 Volt LED Flasher. Flasher is designed to replace stock turn signal flasher on most 1955 to present cars and trucks with 2 prong 12v systems. Flasher has NEGATIVE ground (flasher will NOT work with early 6v POSITIVE ground cars/truck or motorcycles). Replacement of the stock flasher is usually needed in order for the LED turn signals to operate as intended. Solves: hyper flashing, burnt out bulb indication, or non flashing when using led lights and led light bulbs. These flashers will also work with stock turn signals, so if you change back to stock lights, there will be no need to swap out the flasher We also offer 3-prong LED flashers for most pre-1955 vehicles that have been converted to 12v Solve Turn Signal Problems: Hyper Flashing, No Flashing, or Burnt Out Bulb Indication when using LED Lights and LED Bulbs 2 Terminal Flasher / 2 Prong with Ground Wire Use with LED lights Max 20 Amps  
    • $14.95
    Backorder available
  • 2 Pin Prong 12V Terminal Relay Electronic Flasher Switch LED Turn Signal Light
    (1)  2 Terminal 12V LED Electrical Flasher New 2-prong (2 terminal with ground wire) 12 Volt LED Flasher. Flasher is designed to replace stock turn signal flasher on most 1955 to present cars and trucks with 2 prong 12v systems. Flasher has NEGATIVE ground (flasher will NOT work with early 6v POSITIVE ground cars/truck or motorcycles). Replacement of the stock flasher is usually needed in order for the LED turn signals to operate as intended. Solves: hyper flashing, burnt out bulb indication, or non flashing when using led lights and led light bulbs. We are also including a FREE "reverse polarity" adapter. If your turn signal flasher dock has the wires reversed, no need to disconnect, switch, and reinstall wires. Simply attach the adapter to the end of the flasher. These flashers will also work with stock turn signals, so if you change back to stock lights, there will be no need to swap out the flasher We also offer 3-prong LED flashers for most pre-1955 vehicles that have been converted to 12v Solve Turn Signal Problems: Hyper Flashing, No Flashing, or Burnt Out Bulb Indication when using LED Lights and LED Bulbs 2 Terminal Flasher / 2 Prong with Ground Wire Use with LED lights Max 20 Amps
    • $17.95
  • Polarity Adapter/Reverser | Lighting Hardware
    Polarity Adapter for Item # 90650 Only Easily Reverses "X" and "L" Terminals without Modifying Vehicle Wiring
    • $2.89
Products: 112 of 13
  • 4X6" Red LED COB Halo Crystal Glass/Metal Headlight H4 6K HID Light Bulb Pair
    OCTANE LIGHTING - 4"x6" DIAMOND CRYSTAL CLEAR GLASS LENS / METAL HOUSING H4 CONVERSION HEADLIGHTS WITH BUILT IN RED COB LED HALO ANGEL EYE RINGS - PAIRHalo rings can be wired into the parking lights, headlights, turn signals, or connected to a separate switch.Extremely Bright Halo Ring! - Day or NightINCLUDES 6000K HIGH INTENSITY DISCHARGE (HID) HI/LOW BI-XENON SLIM BALLAST LIGHT BULB KIT! PAIR - LEFT & RIGHT SIDE New PAIR of 2 Headlamps SAE/DOT Approved - Street Legal3000 Lumen Headlight BrightnessDaylight White Visibility6000k (White Color) AC Slim Ballast 35w Bi-Xenon HID KitHigh & Low Beam FunctionPlugs into Factory Wiring ConnectionBrighter and Whiter than stock headlights High Quality Glass Faced & Metal Backed Semi-Sealed Beam - Removable / Replaceable Light Bulbs Fits cars and trucks with 4x6 rectangle headlightsFits into stock headlight bucketPart number interchange: H4651/H4656/4651/4652Halo is wired separately with power/ground wireExtremely Bright Halo - Visible day or nightDOT / SAE approved THIS LISTING IS FOR A NEW PAIR - 4x6" CRYSTAL CLEAR GLASS LENS / METAL BACKSIDE H4 CONVERSION RED LED HALO HEADLIGHTS. INCLUDES 6000K BI-XENON HI/LOW SUPER BRIGHT WHITE HID KITS. THIS SET INCLUDES (2) HEADLIGHTS, (2) 6K HID BULBS, (2) HID SLIM DIGITAL BALLASTS AND RELAY HARNESSES. THESE HAVE THE ORIGINAL SHAPED PRONGS ON THE BACK SO THEY WILL PLUG RIGHT INTO YOUR ORIGINAL WIRING HARNESS PLUGS. IN RARE CIRCUMSTANCES, WIRING MODIFICATION MAY BE REQUIRED. THIS KIT IS BI-XENON, MEANING YOU WILL HAVE LOW BEAM AND HIGH BEAM FUNCTION WITH THE HID LIGHT KIT. THE HALO IS EXTREMELY BRIGHT AND WIRED SEPARATELY WITH A POWER AND GROUND WIRE. THE HALO CAN BE SPLICED INTO THE PARKING LIGHTS, TURN SIGNAL, IGNITION SOURCE FOR DAYTIME RUNNING LIGHTS, OR TO A SEPARATE SWITCH. THESE ARE FOR ANY CAR OR TRUCK THAT HAS 4 SQUARE 4x6" HEADLIGHTS. DOT / SAE APPROVED.INTERCHANGE: H4651 / H4656 / 4651 / 4652 THESE ARE GLASS AND WE WILL TAKE EXTRA CARE IN PACKAGING. UNRIVALED BRIGHTNESS The Standard for 35w HID Kit 3000 lumen @ 35 watts Ultra Bright HID Kit - 35% brighter than 35w DC Analog HID KitsOctane HID Bulbs - High and Low Beam Function Pushing 3000 Lumens!AC Digital Technology - No Flickering. PERIOD.Waterproof Ballasts - We coat our chips with silicone to ensure maximum protection20 Minute Setup - QuickSnapTM connectors gets you back on the road quicker Why Choose Octane Lighting? We dont cut corners. We pride ourselves on quality and reliability. Every component of this HID kit goes through a series of Quality Assurance Tests to ensure consistent color matching and stable power output. Although many HID companies use similar ballast housings, the internal components are always different and inferior. Trust the original. Trust what lasts. Your Comprehensive HID Conversion Kit Includes: (2) AC Digital 35w Power Ballasts (2) AC Ballast Igniters (2) 35w-Rated HID Bulbs (2) HID Capacitors (1) HID Power Relay Harness (2) Metal Mounting Brackets and Screws (1) Easy-to-Use Installation Instructions Features: AC Series Ballast: 35w Power Output Provides Maximum Light and Cverage Where You Need ItBetter, Brighter, Longer: Octane HID bulbs uses power more efficiently to optimally achieve an ultra-bright 3000 lumens shine while extending the bulbs life to over 3000 hoursPlug-and-Play Installation: Just connect QuickSnap™ connectors, securely lock Octane Lighting bulbs into housing and youre done. No cutting, splicing or headachesComprehensive HID kit that includes a relay harness and capacitors. Everything you need is included!
    • $209.95
  • 7X6" LED HID Light Bulbs Crystal Clear Sealed Beam Headlamp Headlight Pair
    THESE ARE A 7x6 PAIR WHITE HID LED HEADLIGHTS Replaces factory Sealed Beams - Plugs into factory headlight plugsINCLUDES (2) 15-LED DUAL BEAM HEADLIGHT ASSEMBLIESTHIS LISTING IS FOR A PAIR NEW 7x6" CRYSTAL CLEAR LENS - ALUMINUM BACKED HEADLAMP BULBS WITH 15 WHITE LEDs INSIDE THE HOUSING. THIS LISTING IS FOR 2 HEADLIGHTS. THESE WILL FIT ANY CAR OR TRUCK THAT HAS 7X6 or 5x7 INCH HEADLIGHTS. SOME MODIFICATION TO THE HEADLIGHT BUCKET MAY BE REQUIRED, BUT ON MOST CARS THEY ARE PLUG AND PLAY AND WILL ONLY TAKE YOU 15 MINUTES TO INSTALL WITH BASIC HAND TOOLS. WE WILL TAKE EXTRA CARE IN PACKAGING.INTERCHANGE: H6054 / 6054 ITEM SPECIFICS:Power Draw: 12V / 55 WBeam Pattern: Flood Beam/ Spot BeamLight Output: High Beam 3200 lumens per assembly, Low Beam 1550 lumens per assemblyColor Temperature: 5000K, 6000KOperating Voltage: 12V DCOperating Amperage: 3A at 12VWattage: 45WWaterproof Rating: IP68Light: 15 3W LEDsHousing Material: Black AluminumLens Material: Clear Polycarbonate Lens LensHours: 5000+ HoursDimensions: L-3" X W-7" X H-6"
    • $59.95
    Out of stock
  • 7" Blue Halo Ring Angel Eyes 6K 20/40w LED Headlight Headlamp Light Bulbs Pair
    OCTANE LIGHTINGPAIR - New 7" Split Circuit LED Halo Headlights   Blue LED Rings can be Wired to be Daytime Running Lights, Directional Turn Signals or to Come on with the Headlights Includes Super White 6K 20/40w G5 LED Headlight BulbsPAIR - Two Headlights7" Round Crystal Clear Glass LED Headlight w/ Blue LED Halo RingHalo Ring Has Bright LEDs Around Entire HeadlightCrystal Clear Glass Lens6000k 20/40w LED Headlight BulbsLow Beam / High Beam HeadlightHeadlight Plugs Directly into Factory Headlight Wiring Connector PlugSome Modification to the Back of the Headlight Bucket May be RequiredUnique Split Circuit Halo is Wired Separately - Can Be Used As DRL or Left & Right Directional Turn SignalsPart Number Interchange: H6024 / 6014DOT / SAE ApprovedLED BULB SPECIFICATIONS:Bulb Type: - Generation 5 - H4 (9003) LED Low Beam / High Beam Headlight with Canbus Error Canceller PlugsCanbus Error Free Electrical plugs prevent any headlight error codesWattage: 40W / EACH PC Luminous Flux: 8000LM / Set ,4000LM / Each Bulb  Beam Angle: 360°  Placement on Vehicle: Left, Right, FrontColor Temperature: 6000K Pure White
    • $119.95
  • 552 Heavy Duty Thermal Flasher 2-Terminal Auto Turn Signal Hazard Lights 12 Volt
    Features 552 12v Thermal Flasher 32CP MAX 6 12 Volt, 2 pin, 2-6 lamp Thermal design Turn signal DOT approved Previously sold as V552
    • $7.95
    Out of stock
  • 2 Pin Prong 12V Terminal Relay Electronic LED Flasher Switch Turn Signal Light
    (1)  2 Terminal 12V LED Electrical Flasher New 2-prong (2 terminal with ground wire) 12 Volt LED Flasher. Flasher is designed to replace stock turn signal flasher on most 1955 to present cars and trucks with 2 prong 12v systems. Flasher has NEGATIVE ground (flasher will NOT work with early 6v POSITIVE ground cars/truck or motorcycles). Replacement of the stock flasher is usually needed in order for the LED turn signals to operate as intended. Solves: hyper flashing, burnt out bulb indication, or non flashing when using led lights and led light bulbs. We are also including a FREE "reverse polarity" adapter. If your turn signal flasher dock has the wires reversed, no need to disconnect, switch, and reinstall wires. Simply attach the adapter to the end of the flasher. These flashers will also work with stock turn signals, so if you change back to stock lights, there will be no need to swap out the flasher We also offer 3-prong LED flashers for most pre-1955 vehicles that have been converted to 12v Solve Turn Signal Problems: Hyper Flashing, No Flashing, or Burnt Out Bulb Indication when using LED Lights and LED Bulbs 2 Terminal Flasher / 2 Prong with Ground Wire Use with LED lights Max 20 Amps
    • $17.95
  • 2 Pin Prong Terminal LED Flasher Electronic Relay Switch Turn Signal Light 12V
    (1)  2 Terminal 12V LED Electrical Flasher New 2-prong (2 terminal with ground wire) 12 Volt LED Flasher. Flasher is designed to replace stock turn signal flasher on most 1955 to present cars and trucks with 2 prong 12v systems. Flasher has NEGATIVE ground (flasher will NOT work with early 6v POSITIVE ground cars/truck or motorcycles). Replacement of the stock flasher is usually needed in order for the LED turn signals to operate as intended. Solves: hyper flashing, burnt out bulb indication, or non flashing when using led lights and led light bulbs. We are also including a FREE "reverse polarity" adapter. If your turn signal flasher dock has the wires reversed, no need to disconnect, switch, and reinstall wires. Simply attach the adapter to the end of the flasher. These flashers will also work with stock turn signals, so if you change back to stock lights, there will be no need to swap out the flasher We also offer 3-prong LED flashers for most pre-1955 vehicles that have been converted to 12v Solve Turn Signal Problems: Hyper Flashing, No Flashing, or Burnt Out Bulb Indication when using LED Lights and LED Bulbs 2 Terminal Flasher / 2 Prong with Ground Wire Use with LED lights Max 20 Amps
    • $17.95
  • 12v LED Electronic Flasher
    12v LED Electronic Flasher QA-W7ZP-XD1V
    • $11.95
  • 2 Pin Prong Terminal LED Flasher Electronic Relay Switch Turn Signal Light 12V
    (1)  2 Terminal 12V LED Electrical Flasher New 2-prong (2 terminal with ground wire) 12 Volt LED Flasher. Flasher is designed to replace stock turn signal flasher on most 1955 to present cars and trucks with 2 prong 12v systems. Flasher has NEGATIVE ground (flasher will NOT work with early 6v POSITIVE ground cars/truck or motorcycles). Replacement of the stock flasher is usually needed in order for the LED turn signals to operate as intended. Solves: hyper flashing, burnt out bulb indication, or non flashing when using led lights and led light bulbs. We are also including a FREE "reverse polarity" adapter. If your turn signal flasher dock has the wires reversed, no need to disconnect, switch, and reinstall wires. Simply attach the adapter to the end of the flasher. These flashers will also work with stock turn signals, so if you change back to stock lights, there will be no need to swap out the flasher We also offer 3-prong LED flashers for most pre-1955 vehicles that have been converted to 12v Solve Turn Signal Problems: Hyper Flashing, No Flashing, or Burnt Out Bulb Indication when using LED Lights and LED Bulbs 2 Terminal Flasher / 2 Prong with Ground Wire Use with LED lights Max 20 Amps
    • $17.95

Browse by Vehicle